This MS Flight Simulator utility performs the following tasks
* Remove and re-Enable aircrafts.
* Remove and re-Enable aircraft variations.
* Edit aircraft name, manufacturer and variation text.
* Remove and reclaim unused gauge files.
* Setup the forces of the "Force Feedback Joystick.".
* Setup the "Flight Tuning Parameters"
* Manage backup files of "aircraft.cfg" for each aircraft.
Why CleanAir?
* Easy to use
* Apply no constraints on the way you use your FS.
* Apply no constraints on aircraft fleet management
* No Data Base Files are stored on your disk
* Freeware
Internet site: www.cleanair.tk
Installation
* Copy the one program file to any directory.
Using windows explorer run the program.
* When FS is properly installed, the CleanAir
will automatically set the FS directory.
Please make sure the path of FS directory is in place
You can navigte to the FS directory or key it in.
* Get your free registration code. Click on the
"Freeware Registration" button located on the main window.
Log onto our website, fill in your name, the serial number
and your email. The free code will be sent to your email
within 72 hours. Copy the code into the regisration window,
* Installation is done.
Disable aircrafts:
* On the active aircraft table select the aircrafts to be removed.
* Click the remove button on the upper left corner.
The selected aircarfts will be removed.
* For easy navigation, click on the header of any column
to sort the table.
When disabled the directory of the aircraft will be moved
to a directory named "AircraftRemoved" undr the FS directory.
Any aircraft in this directory can be reactivated by CleanAir.
You can manually delete aircrafts from the "AircraftRemoved"
directory however if deleted the CleanAir will not be able to
reactivate it.
note: To Reactivate aircrafts by CleanAir you need to
register. Please Get your Free registration code in our
website www.cleanair.tk.
Aircraft Activation
In order to activate disabled aircrafts should
have your free registration code confirmed.
To enable aircrafts: select them on the disabled aircrafts table,
click the remove button above the table on thw left corner.
Aircraft text attributes
To edit the aircrafts name (type),manufacturer or directory.
Select the cell and Click the text, like you do when editing
file names on the windows explorer.
To disable/enable "aircrafts variations" or edit the variations
text,
* Select the variation cell and click the text,
* Click the elipsis button that pops up.
* Manipulate the variations tables the same way you
manipulate the Aircrafts tables.
Gauges Manipulations
Click the clean gauges.button. Unused gauges will be moved
to the directory "gaugesRemoved" under the main FS directory.
CleanAir will move any gauge file which is not used by
one of the panels of the aircrafts on the "aircraft" or
"AircraftRemoved" directories, Gauges which are on panels
located in the "fsfsconv" will not be removed.
If a gauge file in one of the panels above cannot be found
in the "gauges" directory, CleanAir will search for it and
copy it to the "gauge" directory. The directories searched
are:"Gauges removed", The aircrafts "panel" directory and others.
Force Feedback Joystick Parameters
Each parameter of the Force Feedback Joystick control, is
being expained and set on this page.
One click button fits all Aircrafts without Force Feedback section
with default parameters automatically.
Each parameter can be set individually on each aircraft.
The parameters are set using either a dial for which a maximum and
a minimum values are set. The max/min values are taken from the
aircrafts in your aircraft fleet and can be changed on the spot.
you have no limit on the values entered into the text box below
each dial.
parameters can be copied from one aircraft to another.
Flight Tuning Parameters
Each parameter of the Tuning Parameters, is being expained and set.
The parameters are:
Lift parameter-Controls the power that push up your airplane.
Flight control effectiveness parameters- These are forces applied by
the aircraft's control surfaces.
Stability parameters- Multipliers on the default stability
(damping effect) about the corresponding axis of the airplane.
Backup Restoration
10 generations of 'aircraft.cfg' backup files are kept.
A backup file is created when parameters are saved.
To Restore a backpu file:
* Click the restore tab.
* Select an aircraft.
* Select the backup file to restore.
* Click the blue button.
The current Aircraft.cfg file will be backedup into the 11th backup file
and the backup file selected will replace the Aircraft.cfg file.
The Red button will restore all original aircraft.cfg
files. All the changes made will be gone on all aircrafts.
